Model/Brand/Package
Category/Description
Inventory
Price
Data
-
Category: AC-DCconverterDescription: ARTESYN EMBEDDED TECHNOLOGIES MP6-3Q-00 Closed power supply AC/DC, active PFC, fixed output, 85 V, 264 V, 600 W, 24 V, 23.5 A32311+$5176.477910+$5129.419025+$5105.889650+$5082.3601100+$5058.8307150+$5035.3012250+$5011.7718500+$4988.2423
-
Category: AC-DCconverterDescription: 400-1000W Universal I/P, single output, MP series output voltage regulation. All current above 10A output is shared. All remote sensing overvoltage/overcurrent protection, short circuit and reverse voltage protection above 2A output. All single output modules have limit input, good signal and status LED output, good signal and status LED suppression/enable, isolated 5V bias integrated fan power factor correction, IEC EN61000-3-2 harmonic offset specification CISPR22, EN55022-B conducted/radiated EMI anti electromagnetic standard technical specifications - input frequency range | 47 to 440Hz voltage regulation range | ± 10% total adjustment | 0.4% or maximum 20mV # # # Note: When above 50 ° C, it will decrease linearly by 50%. ###Recognize VDE; UL accreditation; CSA Certification # # # Standard IEC 950 EN60950 # # Switching Mode - Astec MP, iMP&VS Spectrum Series9029
-
Category: AC-DCconverterDescription: 1500W、Switching mode, medical certification, single output embedded power supply - LCM1500 Emerson Network Power LCM1500 series is a very economical solution suitable for single output high-power requirements. This power supply typically has an efficiency of up to 89% and is of moderate size. This Emerson AC/DC power supply comes with its own fan, which implements independent thermal management and has a very low noise level. LCM 1500 can be used for industrial and medical applications. Moderate size 2.4 x 5 x 10 inches industrial and medical safety approved \ -40 ° C to 70 ° C operating temperature typical efficiency 89% fan noise ˂ 45 dBA, 80% load 30C, suppression of leakage when closing 264V AC ˂ 0.3 mA maximum total power 1500 W maximum total current 133 A single output 3-year warranty # # # Standard EMI Class B, EN 61000 anti-interference UL60950-1、UL60601、VDE60950-1、VDE6060164911+$3935.060810+$3899.287525+$3881.400950+$3863.5142100+$3845.6276150+$3827.7410250+$3809.8543500+$3791.9677
-
Category: AC-DCconverterDescription: ARTESYN EMBEDDED TECHNOLOGIES LPS255-C Closed power supply AC/DC, active PFC, fixed/adjustable, 85 V, 264 V, 250 W, 24 V, 10.4 A15611+$2210.749210+$2190.651525+$2180.602650+$2170.5538100+$2160.5049150+$2150.4560250+$2140.4072500+$2130.3583
-
Category: AC-DCconverterDescription: Astec 175W Switch Mode Single Output AC/DC Power Supply - LPS 170 Series 175W switch mode AC/DC power supply with a wide range single adjustable output and high efficiency. These AC/DC power adapters have active power factor correction, low output ripple, a built-in EMI filter and are supplied with a cover fitted. Wide range adjustable output Remote sense on main input Power fail and remote inhibit 5V standby output and 12V auxiliary output High efficiency of 75% typical at full load Single wire current sharing Low output ripple Built-in EMI filter Safety ground leakage current of 1.0mA @ 50/60 Hz, 264 VAC input Overvoltage, overload and thermal overload protection Active power factor correction compliance to IEC EN61000-3-2 EMC compliance to FCC Class B conducted, CISPR 22 Class B conducted, EN55022 Class B conducted, VDE 0878 PT3 Class B conducted ### note The 75W output power for this AC/DC power supply is based on a convection rating with a cover fitted. Without a cover this output power would be 110W. The maximum 175W output power for this AC/DC power supply can only be obtained by use of a cooling fan giving 30 cfm forced air, with a cover fitted this rating would be 130W. Derating from 50 to 70 °C is 2.5% per ° C. Suitable connecting kit for these AC/DC power supplies: stock number 151-666 ### Recognize VDE; UL Recognised; CSA Certified; NEMKO; CB # # # Standard VDE: 0805/EN60950 (IEC950), UL1950, CSA 22.2-234 Level 3, NEMKO: EN 60950/EMKO-TUE ### Switch mode - Astec LP and NT series, 110 to 350W94141+$1218.472210+$1207.395225+$1201.856750+$1196.3182100+$1190.7797150+$1185.2411250+$1179.7026500+$1174.1641
-
Category: AC-DCconverterDescription: Astec 175W Switch Mode Quad Output AC/DC Power Supply - LPQ 172 Series 175W switch mode AC/DC power supply with quad output. Outputs 1, 3 and 4 of this AC power adapter are adjustable with a floating 4th output which is also adjustable. This AC/DC power supply has active power factor correction, a low output ripple and built-in EMI filter. A cover is also supplied with this AC power supply. Adjustable outputs on 1, 3 and 4 Remote sense on main output Single wire current sharing Power fail and remote inhibit Built-in EMI filter Low output ripple Efficiency of 75% typical at full load Overvoltage, overload and thermal overload protection Adjustable floating 4th output 5V standby output Safety ground leakage current of 1.00mA @ 50/60 Hz, 264 VAC input Active power factor correction compliance to IEC EN6100-3-2 EMC compliance to FCC Class B conducted, CISPR 22 Class B conducted, EN55022 Class B conducted, VDE 0878 PT3 Class B conducted ### note The 75W output power rating for this AC/DC power supply is based on a convection rating with a cover fitted. Without a cover the rating would be 110W. The maximum 175W output power for this AC/DC power supply can only be obtained by use of a cooling fan giving 30 cfm forced air, with a cover fitted this would be 130 W. Derating from 50 to 70 °C is 2.5% per ° C. Suitable connecting kit for this AC/DC power supply: stock number 151-650 ### Recognize VDE; UL Recognised; CSA Certified; NEMKO; CB # # # Standard VDE: 0805/EN60950 (IEC950), UL1950, CSA 22.2-234 level 3, NEMKO: EN 60950/EMKO-TUE (74 sec) 203 ### Switch mode - Astec LP and NT series, 110 to 350W88531+$1824.684410+$1808.096425+$1799.802350+$1791.5083100+$1783.2143150+$1774.9203250+$1766.6263500+$1758.3322
-
Category: AC-DCconverterDescription: 175W Universal Input, Single Output Medically Approved LP Series Medical safety approvals Active power factor correction IEC EN61000-3-2 compliance Wide range adjustable output Remote sense on main output Single wire current sharing Power fail and remote inhibit Built-in EMI filter Low output ripple Over voltage protection Overload protection Thermal overload protection DC power good indication 5V standby output 12V Aux. output Frequency | 47-63Hz | ---|---|--- Minimum Load | 0A | Connection | Molex KK (not supplied) | Power Ratings | Convection | Forced air | 110W, 75W with cover | 175W, 130W with cover Forced air ratings require a user supplied air flow of 30CFM at 50°C. Ratings are reduced when using a cover. | | ### Derating from 50 to 70 ° C is 2.5% per ° C. # # # Standard VDE 0750/EN60601-1; UL2601; CSA 22 · 2 No 601 · 1 # # # Switching Mode - Astec LP and NT Series, 110 to 350W32961+$4384.377810+$4344.519825+$4324.590850+$4304.6618100+$4284.7329150+$4264.8039250+$4244.8749500+$4224.9459
-
Category: AC-DCconverterDescription: Astec350W Switch mode single output AC/DC power supply - LPS 350 series 250W switch mode single output AC/DC power supply has 2 regulated outputs of 5V and 12V respectively. This AC/DC power supply is equipped with active power factor correction, low output ripple, and a built-in EMI filter, as well as an end mounted fan. The typical efficiency of remote sensing single line current sharing power supply fault and remote control suppression built-in EMI filter with low output ripple at full load is 75%. There are two regulatory outputs for overvoltage, overload, and thermal overload protection, which are 5V and 12V respectively. The safety ground leakage current: active power factor correction complies with IEC EN6100-3-2 EMC complies with FCC Class B conduction and radiation, CISPR 22 Class B conduction and radiation, EN55022 Class B conduction and radiation, VDE 0878 PT3 Class B conduction and radiation. Note that the reduction range from 50 to 70 ° C is 2.5% reduction in output power per ° C. Connection kit for this AC/DC power supply: Stock No. 151-638 # # # Approved VDE, UL Approved, CSA Certified, NEMKO, CB, BABT # # # Standard VDE: 0805/EN60950 (IEC950), UL1950, CSA 22.2-234 Level 5, NEMKO: EN 60950/EMKO-TUE (74 sec) 203, BABT: EN60950/BS7002 # # # Switch mode - Astec LP and NT series, 110 to 350W15281+$4778.483610+$4735.042825+$4713.322550+$4691.6021100+$4669.8817150+$4648.1613250+$4626.4409500+$4604.7206
-
Category: AC-DCconverterDescription: Astec 250W Switch mode single output AC/DC power supply - LPS 250 series 250W switch mode AC/DC power supply is equipped with universal input, adjustable single output, and 2 regulated outputs of 5V and 12V respectively. This AC/DC power supply is equipped with active power factor correction, low output ripple, and a built-in EMI filter. Inventory numbers 289-5131, 289-5147, 289-5153, and 289-5169 come with a double ended fan and AC air inlet. The typical efficiency of the remote sensing single line current sharing power supply fault and remote control suppression built-in EMI filter under full load is 75% for overvoltage, overload, and thermal protection. There are two regulatory outputs, 5V and 12V respectively for safety ground leakage current: active power factor correction complies with IEC EN6100-3-2 EMC complies with FCC Class B conduction and radiation, CISPR 22 Class B conduction and radiation, EN55022 Class B conduction and radiation, VDE 0878 PT3 Class B conduction and radiation. Note that due to the lack of rated convection for these AC/DC power supplies, inventory numbers 192-1201, 192-1223, 192-1239, and 192-1267 do not provide fans and require users to force 30CFM air cooling through the length of the power supply. The reduction range from 50 to 70 ° C is a 2.5% decrease in output power per ° C. Connection kit for this AC/DC power supply: Stock No. 151-717 # # # Approved VDE, UL Approved, CSA Certified, NEMKO, CB, BABT # # # Standard VDE: 0805/EN60950 (IEC950), UL1950, CSA 22.2-234 Level 5, NEMKO: EN 60950/EMKO-TUE (74 sec) 203, BABT: EN60950/BS7002 # # # Switch mode - Astec LP and NT series, 110 to 350W88671+$2115.471610+$2096.240025+$2086.624350+$2077.0085100+$2067.3927150+$2057.7769250+$2048.1611500+$2038.5454
-
Category: AC-DCconverterDescription: 300W,Universal input, 4 x 7 in., single output, medical power supply, LCM300 series Artesyn LCM300 series packaged front-end AC-DC power supply includes five single output models, providing standard voltage of 12V, 15V, 23V, 36V or 48V and 5V standby output. Each model accepts a universal input of 90-264 V AC, has medical safety certification, and comes with a typical full load efficiency of 91%. These CNC PMBus ™ Compatible with CNC power supplies can provide high levels of modification flexibility for specific application functions, such as special battery charging and management, peak load handling, voltage control, and fan speed curves. Placed in a compact 4 x 7 inch housing below 1U height, the LCM300 power supply includes a built-in intelligent fan for cooling, providing up to 310W of output power. The 24V and 36V models can provide up to 350W of power at operating temperatures up to 45 ° C. Medical and ITE Safety 310W Output Power (350W at 45 ° C, for 24V and 36V models) Industrial/Medical Safety Optional 5V @ 2A Internal Management Efficiency Up to 91% Variable Speed Intelligent Fan DSP Control PMBus Compatibility ± 20% Adjustment Range Single Output Operating Temperature: -40 ° C to+70 ° C # # # Recognized UL, CSA, VDE, China CCC, CB Plan Reports/Certificates # # Standard UL60950-1 508/1598/1433, UL60601-1 ED 3; CSA60950-1; VDE60950-1, VDE60601 # # # Switch Mode - Artesyn60951+$1467.875210+$1454.530925+$1447.858750+$1441.1866100+$1434.5144150+$1427.8422250+$1421.1701500+$1414.4979
-
Category: AC-DCconverterDescription: ARTESYN EMBEDDED TECHNOLOGIES LCM600Q-T Closed power supply AC/DC, medical, fixed/adjustable, 85 V, 264 V, 600 W, 24 V, 27 A31491+$1429.629310+$1416.632725+$1410.134450+$1403.6360100+$1397.1377150+$1390.6394250+$1384.1411500+$1377.6428
-
Category: AC-DCconverterDescription: 600W,通用输入,宽输出调节,医疗电源,LCC600 系列 Artesyn LCC600 系列封装式交流-直流电源可接受 90-264V 交流的通用输入,具备医疗安全认证,并带 93% 的典型效率。 这些 PMBus™ 兼容数控电源可提供高水平的修改灵活性。 LCC600 系列交流-直流电源在高温环境下提供 600W 的全功率。 广泛的工作温度范围(- 40 至 85°C 基板) 宽输出调节 远程输出开/关 AC_OK;DC_OK 信号 5V 待机电压 传导冷却 I2C / PMBus ### 认可 UL、CSA、TUV、中国 CCC、CE 标志 ### 标准 UL60601-1 第二版;CSA60601-1 第二版;ANSI60601-1;TUV60601-1 第二版;TUV60601-1 第三版;IEC60950-1、IEC60601-1 ### 开关模式 - Artesyn9856
